Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Ontario, CA | Hampton Contractors
We provide independent Kohler installation, repair, and conversion work across Ontario. If you own a home in the older 91761 or 91764 core, or a newer build near the 60, Kohler fixtures in Ontario fail in predictable ways: hard water scales up cartridges, and slab movement on shrink-swell clay cracks drain seals. We fix both, with genuine Kohler parts where the model still supports them. Call (833) 467-4075 for a free estimate.
Hampton Contractors is not authorized, sponsored, or endorsed by Kohler. We’re an independent general contractor with a whole-home brand portfolio that includes Kohler plumbing fixtures, and we’ve done enough Kohler work in Ontario to know exactly what goes wrong and what holds up. Whether you need a Kohler sales & service specialist or a full bathroom conversion planned around Ontario slab conditions, one contractor covers it.
Why Ontario Residents Choose Us for Kohler Service
Brent Calloway has been on job sites since he was eighteen, and he’s never seen a homeowner who appreciated being talked in circles. That’s why our General Contractor in Ontario starts every Kohler job with an honest read on the fixture: is this worth repairing, or are we throwing parts at an aging valve body? We tell you plain. Kohler cast-iron tubs and ceramic valves are usually worth repairing. A failed cartridge on a 40-year-old rough-in valve usually isn’t.
The 1950s-1970s stucco tract homes that dominate 91761 and 91764 came with simpler plumbing stacks and slab penetrations than newer work, and many still have their original cast-iron tubs. We know those rough-ins. We also carry enough Kohler in Rancho Cucamonga and Ontario OEM stock for common callbacks: cartridges for Valiant and Memoirs single-handle valves, Wellworth and Santa Rosa fill valves, Bellwether and Villager tub drain gaskets. You’re not waiting on a distributor order when your shower valve starts stiffening up. Good work doesn’t need a disclaimer.
Styles & brands we work with







Common Kohler Construction Problems We Solve in Ontario
- Stiff or dripping single-handle valves from hard water scale. Ontario’s municipal water carries heavy mineral content, and Kohler’s ceramic cartridge valves are precision-fit. Calcium deposits wedge into the cartridge bore and the handle gets stubborn, or water starts weeping at the spout. We swap in a genuine Kohler OEM cartridge and reset the valve, rather than cranking the handle until it breaks.
- Cast-iron tub drain seals weeping at the slab. The shrink-swell clay under Ontario’s older slab-on-grade homes moves with the hot-dry cycle. A Kohler Bellwether or Villager tub sits on a drain assembly that crosses that movement joint, and the seal is what fails. We reset drains with fresh Kohler OEM gaskets and check the waste-and-overflow alignment.
- Finished trim abraded by Santa Ana wind dust. High-desert air in Ontario carries grit that scours polished chrome and brushed Vibrant finishes on Kohler faucet trim, especially in homes with older single-pane windows or loose door seals. We’ll tell you honestly whether a finish swap makes sense or if the whole trim set needs replacement.
- Hot-side leaks on aging ceramic disc internals. Years of mineral-loaded supply wear the ceramic disc in Kohler kitchen and bath valves until the hot side fades and drips. When the valve body is still sound, a cartridge replacement solves it. When the body shows pitting, we recommend replacing the valve, not chasing the same leak twice.
- Enamel chipping at the tub overflow and drain. Ontario’s older cast-iron tubs sit on slabs that flex. The enamel near the overflow and drain takes the stress, and once it chips, water gets behind it. We repair what’s repairable with Kohler-compatible enamel, and when the chip is structural, we’ll say so and plan a tub-to-shower conversion instead.
Kohler Service in Ontario: What Local Conditions Mean for Your Equipment
Ontario’s original citrus-and-dairy core sits on slab foundations over shrink-swell clay that swells in rare wet winters and contracts hard through our long, dry, triple-digit summers. That movement doesn’t just crack stucco; it torques every drain and rough-in that crosses the slab. So when Kohler in San Antonio Heights and 91762-adjacent tract homes show water stains on the ceiling below, the leak is usually at the slab penetration, not the fixture. We’ve pulled enough tubs on those jobs to check the seal first, not the trap. In one 1960s single-story stucco home off the older core, our crew pulled a Kohler Bellwether cast-iron alcove tub and found the drain seal weeping where the clay had shifted. We reset the drain with a fresh Kohler OEM gasket and converted the alcove to a walk-in shower using a Kohler Choreograph wall system and a frameless glass enclosure. No more tub-side leak, and we didn’t have to chase the slab. That’s the difference between a contractor who reads Ontario soil and one who reads a parts catalog.
Kohler Models & Products We Service in Ontario
We work on Kohler Valiant and Memoirs bathroom faucet and shower trim, Santa Rosa and Wellworth toilets, Bellwether and Villager alcove tubs, and Iron/Tones and Whitehaven kitchen sinks. For parts, we use genuine Kohler OEM cartridges, trim, and rough-in valves wherever the model is still supported. Discontinued trim gets quality aftermarket only when there’s no OEM route, and we tell you which is which before anything gets ordered. For Ontario turnaround, we keep common cartridges and drain gaskets in the truck, so most single-fixture service doesn’t stall waiting on freight.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Ontario
Kohler work in Ontario spans a wide range because the fixture condition drives the scope. A cartridge swap is a service call. A tub-to-shower conversion on slab is a structural job. Here’s what our work typically runs:
| Service | Typical Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Shower Replacement | $3,000 – $8,500 |
Your free estimate includes a written line-item quote, so you see exactly where the money goes. No allowances buried in fine print. Call (833) 467-4075 and we’ll walk the project with you.
Serving Ontario, CA — Our Local Coverage Area
We’re based near Kohler in Upland and the Ontario area, and we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Ontario
Hard water calcium has scaled up the ceramic cartridge inside the valve body. The fix is a genuine Kohler OEM cartridge replacement and a valve reset. Call (833) 467-4075 and we’ll get it turning smooth again.
Yes, and Ontario slab homes are exactly where we do this most. We pull the tub, reset the drain penetrating the slab with a Kohler OEM gasket, and install a walk-in shower using Kohler Choreograph walls and a frameless glass enclosure. Call for a free estimate.
Vibrant brushed finishes hold up better than polished chrome under Ontario’s wind-driven grit. Chrome shows every micro-scratch; brushed finishes hide abrasion. If your windows and door seals are tight, finish wear slows considerably. We’ll give you an honest read on your specific exposure.
Genuine Kohler OEM for any model still in production. We use quality aftermarket only for discontinued trim, and we tell you which route your fixture needs before anything is ordered.
A compact Kohler Whitehaven or Iron/Tones undermount sink on a 18- to 24-inch vanity preserves counter space and hides wear, and pairs well with a single-handle Valiant faucet. Call (833) 467-4075 and we’ll lay out options that fit your actual wall dimensions.
Service Areas Near Ontario
We take Kohler work across the Inland Empire, including Hesperia, Spring Valley Lake, Oak Hills, Mountain View Acres, Victorville, and Apple Valley. Our Ontario service area includes 91764, 91798, 91758, and 91761. We also cover Kohler service in Calimesa and Kohler service in Jurupa Valley when your project sits near our edge routes.
Book Your Kohler Service in Ontario Today
From a stiff shower cartridge to a full slab-home tub-to-shower conversion, one call starts the estimate. Reach Hampton Contractors at (833) 467-4075 and Brent or a crew lead will schedule a walkthrough at your Ontario home.
Written by Brent Calloway, Owner at Hampton Contractors, serving Ontario since he first picked up a framing hammer in the High Desert.