Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in Calimesa, CA | Hampton Contractors
We’re Hampton Contractors, an independent Toto service provider working across Calimesa and the 92320 zip code, and we handle everything from loose Drake toilets to full Toto bathroom remodels. We also offer Toto repair in Yucaipa for homeowners just outside city limits. Our crew knows the specific ways Calimesa’s hard water, Pass-driven wind, and infill-heavy housing stock stress Toto fixtures, and we quote fixes in plain numbers before any work starts. Call (833) 467-4075 for a free estimate on Toto service in Calimesa.
Why Calimesa Residents Choose Us for Toto Service
We’ve installed and serviced Toto fixtures across the San Gorgonio Pass for years, from the gravity-flush Drake line to wall-hung Neorest toilets, so we know their supply, flush-valve, and wax-seal behavior under real inland conditions. That experience includes Toto service in Mentone, where the same Pass wind and hard water patterns apply. What that means for a Calimesa homeowner is simple: we don’t guess, and we don’t swap in cheap parts to get off the job faster. We use genuine Toto OEM fill valves, flush towers, wax rings, and supply lines because the tolerances on these fixtures actually matter.
Brent Calloway, our owner, has been working construction in the High Desert since he was eighteen, and he’s built Hampton Contractors on the idea that homeowners should see the brand names behind the work. As an independent contractor, we are not authorized, sponsored, or endorsed by Toto. That independence means we tell you when a $60 OEM rebuild fixes the problem and when a cracked porcelain bowl or failed Neorest board means replacement is the honest call.
Styles & brands we work with







Common Toto Construction Problems We Solve in Calimesa
- Wax-ring and flange failures on hard-water installs: Mineral scale from Calimesa’s water degrades the seal over time, and the toilet starts rocking on the subfloor. We see this most often in older ranch and manufactured homes on pier-and-beam, where the floor flexes slightly with temperature swings.
- Flush-tower and fill-valve wear on Drake and Ultramax models: The plastic tower cams wear down and cause phantom running fills, especially with the area’s mineral-heavy water. It sounds like the toilet is flushing itself at night, and the fix is usually a $60 – $120 OEM rebuild.
- Supply-line and angle-stop corrosion: Dry, hot interior conditions near south and east-facing walls cause slow leaks at the tank inlet. These leaks are easy to miss until the subfloor starts staining or the water bill ticks up.
- Electronic washlet and Neorest seat board failures: San Gorgonio Pass wind drives grit through vents and window gaps into the seat housing, fouling sensors and clogging the bidet nozzle assembly. Summer heat cycling makes it worse, and these boards don’t last as long here as they do in coastal air.
- Rocking toilets on new or retrofitted floors: Because so much Calimesa construction is infill on former agricultural land, a lot of bathroom work lands on freshly framed or retrofitted floors where the drain offset and subfloor flatness drive repeated seal problems, not the Toto fixture itself.
Toto Service in Calimesa: What Local Conditions Mean for Your Equipment
Calimesa’s growth pattern is different from most Southern California cities. The city incorporated in 1990, and a large share of its housing stock was built during that same wave of tract development and senior-community construction. That means a Toto install in Calimesa often isn’t a simple swap on a 1960s slab. It’s a new bathroom going into an addition, a converted space, or a 1990s tract home where the original subfloor was framed fast and the drain offset was never quite level. We rebuilt a small hall bath in a 1990s tract home off the I-10 corridor in the 92320 core where the homeowner’s Toto Drake had been rocking for years. Once we pulled it, the PVC flange was cracked and the subfloor was cupped. We reset the drain offset, added a proper flange repair ring, set the new Drake on a reinforced wax ring, and finished the niche with a framed frameless shower and fresh tile so the fixture sits flat and the seal holds. On the same job we swapped the worn flush tower for a genuine Toto OEM unit. That’s the difference between a toilet that works for a season and one that holds for fifteen years.
Toto Models & Products We Service in Calimesa
Our crew works on the full range of Toto residential and commercial-style fixtures. That includes the Toto Drake two-piece line (CST743 and CST776), the Ultramax II one-piece (MS604114CEFG), and the Neorest wall-hung and floor-mounted washlet toilets. We also service Toto EcoPower and Touchless flush valves and sensor faucets, which show up in some Calimesa senior-community common areas and a few custom homes. For flush and seal work we stock genuine Toto OEM parts locally, which means faster turnaround for Calimesa homeowners. For cosmetic or non-critical items like seat hinges and bolt caps, we’ll use quality aftermarket parts where it makes sense. On most Drake and Ultramax fixtures, a $60 – $120 OEM rebuild is the right call. When the porcelain is cracked, the flange is broken, or a Neorest electronic board has failed, we quote replacement honestly rather than chase a part that won’t hold. We’re also a full-scope contractor, so Toto fixture work often runs alongside Toto sales & service from our broader bathroom remodel capability. If you’re planning a small bath remodel, walk-in shower, or tub-to-shower conversion in Calimesa, we can handle the fixture, the tile, the plumbing, and the framing under one contract.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in Calimesa
Here’s what Calimesa homeowners can expect to pay for common Toto-related construction work, based on our current High Desert pricing:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A simple Toto toilet reset with a new OEM wax ring and flange repair typically lands under $400. A full Drake flush-tower rebuild runs $60 – $120 in parts plus labor. Your free estimate includes a written line-item quote, and we don’t change the price once work starts. Call (833) 467-4075 to schedule yours.
Serving Calimesa, CA — Our Local Coverage Area
We’re based in the Calimesa area and know this community well, and we regularly make the short drive for Redlands Toto service calls too. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in Calimesa
No. Hampton Contractors is an independent contractor serving Calimesa and the surrounding High Desert, and we are not authorized, sponsored, or endorsed by Toto. We use genuine Toto OEM parts for flush and seal work because the tolerances matter, but we’re free to tell you honestly when replacement beats repair, which an authorized shop might not say.
We use genuine Toto OEM fill valves, flush towers, wax rings, and supply lines for flush and seal work. For cosmetic or non-critical items like seat hinges and bolt caps, we’ll use quality aftermarket parts where it makes sense. Call (833) 467-4075 if you want to know which parts your specific fixture needs.
A standard Drake or Ultramax flush-tower rebuild is usually a one-visit job, two to three hours on site. A wax-ring and flange repair on a rocking toilet typically takes half a day if the subfloor is sound; if the flange is broken or the floor is cupped like the one we rebuilt off the I-10 corridor, plan for a full day. Full bathroom remodels with Toto fixtures run two to six weeks depending on tile and scope.
We service the Drake two-piece line (CST743 and CST776), the Ultramax II one-piece (MS604114CEFG), the Neorest wall-hung and floor-mounted washlet toilets, and Toto EcoPower or Touchless flush valves and sensor faucets. If you have a model not listed, call us. If we can’t fix it, we’ll say so.
Most wax-ring and flange failures run under $400 with a new OEM seal and flange repair. Phantom running from a worn flush tower is usually $60 – $120 in parts plus labor. For an exact quote on your specific fixture, call (833) 467-4075 – estimates are free, and we’ll give you the number before any work starts.
We pull the toilet, inspect the flange and subfloor, and then make the call. If the flange is intact, we reset with a reinforced wax ring and new OEM bolts. If the flange is cracked or the subfloor is cupped from years of slow leaking, we repair or replace the flange and level the subfloor before setting the new Toto fixture. Call (833) 467-4075 to schedule an inspection, especially if you’ve had repeated seal failures.
Service Areas Near Calimesa
Hampton Contractors serves Calimesa and the surrounding High Desert communities, including Hesperia, Spring Valley Lake, Oak Hills, Mountain View Acres, Victorville, and Apple Valley. If you’re in a nearby area and need Toto service, Calimesa service area coverage extends throughout the region. For Toto work specifically, Toto service in Jurupa Valley and Toto service in Pedley are also available from our crew.
Book Your Toto Service in Calimesa Today
If your Toto toilet is rocking, running, or leaking in Calimesa, or you need Toto repair in Loma Linda, don’t wait for the subfloor to get worse. Call (833) 467-4075 today to schedule your free estimate. We’ll come out, look at the fixture, and give you a written quote in plain numbers. Good work doesn’t need a disclaimer.
Written by Brent Calloway, Owner at Hampton Contractors, serving Calimesa since the early 2000s.