Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Upland, CA | Hampton Contractors
Hampton Contractors provides independent Delta fixture service, repair, and installation across Upland, including the 91784, 91785, and 91786 ZIP codes. We work on Delta faucets, valves, and shower systems inside full bathroom and kitchen remodels, plus tub-to-shower conversions throughout the city. What sets our Upland Delta work apart is that we plan for what this city actually does to plumbing: hard water that seizes cartridges, historic plaster walls that hide decades-old rough-ins, and Santa Ana wind grit that eats at foothill exterior fixtures. Call (833) 467-4075 for a free estimate.
We carry genuine Delta OEM cartridges and repair kits suited to Upland homes, and we know the failure patterns this city produces better than most. As an independent contractor, we’re not authorized or sponsored by Delta. We recommend their fixtures because we’ve made them last in Upland houses for years. Brent Calloway, who leads our crews, learned construction in the High Desert and brings that same material-specific approach to every Delta valve and faucet we touch.
Why Upland Residents Choose Us for Delta Service
Delta fixtures are common in Upland for good reason. The Monitor 14 Series tub/shower valve and Classic single-handle kitchen faucet have been installed across this city for decades. But “common” means we’ve seen what happens to them here, and that experience shapes how we repair them.
We stock genuine Delta OEM cartridges, pressure-balance spools, and repair kits for the models Upland homes actually have. Aftermarket cartridges can work, they just don’t hold up as long in Upland’s treated water, which runs hard. When a Delta valve body is sound, we repair it. When the body is pot metal, discontinued, or has been rebuilt twice already, we say so and recommend replacement. That honesty comes from Brent’s way of running jobs: tell the homeowner what the fixture needs, what it costs, and why, in plain numbers. Good work doesn’t need a disclaimer.
We’re also a full-scope general contractor, which matters when a Delta repair turns into something bigger. If we find a seized cartridge behind a 1920s plaster wall near downtown and the rough-in needs correcting, we don’t have to call another trade. We handle the wall work, the valve replacement, and the finish ourselves.
Styles & brands we work with







Common Delta Construction Problems We Solve in Upland
Here’s what we run into most often with Delta fixtures in Upland homes, and why each one is so tied to this city’s conditions:
- Stiff or seized Delta Monitor valve cartridges. Upland’s water supply carries enough dissolved minerals that untreated scale builds up inside the cartridge bore within a few years. The handle gets progressively harder to turn, and the temperature starts drifting. We pull the old cartridge, clean the valve body, and install a genuine Delta OEM replacement.
- Sudden temperature swings in 1980s and 1990s ranch tracts. Many of Upland’s mid-century homes still run original Delta pressure-balance spool valves. Sediment accumulates, the spool sticks or clogs, and the shower runs hot or cold depending on which fixture is being used elsewhere in the house. A rebuilt spool assembly usually fixes it, and we carry those kits.
- Low flow and base leaks on Delta single-handle kitchen faucets in citrus-era homes. Houses with galvanized piping, common in Upland’s historic core, push rust and debris into the cartridge ports and aerators. The faucet either loses pressure or starts leaking at the base. New OEM cartridge and aerator, and the faucet runs like it should.
- Corroded outdoor Delta hose bibs and shower valves on windward walls. In the foothill edges of 91784, Santa Ana winds drive fine grit against exterior fixtures for days at a time. Packing nuts pit, escutcheons develop gaps, and valves corrode faster than they do in flatland cities. We replace these with properly sealed, wind-resistant installations.
- Delta valves buried in historic plaster walls. Downtown Upland’s early-1900s Craftsman and Spanish Colonial homes often had Delta single-handle valves retrofitted in the 1970s or 80s. Those valves sit behind plaster over wood framing with minimal stud space. What starts as a cartridge replacement can become opening a wall to fix the rough-in. We’ve done it enough times that we plan for it before we cut.
Delta Service in Upland: What Local Conditions Mean for Your Equipment
Upland sits at the foot of the San Gabriel Mountains, and that geography shapes how Delta fixtures fail here. The city’s historic core, built during the citrus boom between the 1880s and 1920s, is full of Craftsman and Spanish Colonial homes with original plumbing retrofits. Those Delta single-handle valves from the 1970s and 80s now sit behind plaster on wood-framed walls with very little stud space. A standard cartridge replacement in a flat newer tract is a half-hour job. In a 1920s bungalow near downtown, if the valve body was installed against a joist or the rough-in is out of alignment, that same repair can require opening a wall section to correct the rough-in before a new cartridge will even seat properly. That’s a condition flatland cities with Rancho Cucamonga Delta service simply don’t have, because their housing stock is newer and the framing is different. We’ve also spent enough years in the High Desert and along the foothills to know that Santa Ana wind grit and hard water are not abstract concerns. They’re the two things that most often shorten a Delta fixture’s life in the 91784 foothills. When we install or repair a Delta valve in Upland, we’re accounting for both before we even start.
One field example sticks with us. On a 1920s bungalow near Downtown Upland, our tech replaced a seized Delta Monitor 14 Series shower cartridge and found the valve body had been installed against a floor joist with no access panel. We opened a small plaster section, corrected the rough-in, installed a new Delta pressure-balance valve, and added a removable access door so the next repair takes minutes, not a wall. That’s the difference between a cartridge swap and Upland plumbing that actually holds up.
Delta Models & Products We Service in Upland
We work on the Delta models Upland homes actually have installed, not just the current catalog. The Monitor 14 Series tub/shower valve is the workhorse we see most often in mid-century ranch tracts and newer remodels. The Delta Classic single-handle kitchen faucet shows up in everything from bungalows to new foothill builds. We also service the Delta Foundations two-handle bathroom faucet, common in rental and guest bath remodels, and the In2ition two-in-one shower head, which we see more and more in Upland bathroom upgrades.
Our parts approach is straightforward: genuine Delta OEM cartridges and repair kits for valves and faucets, because aftermarket cartridges just don’t last as long in this city’s water. We keep the most common OEM cartridges stocked locally so a Upland service call doesn’t stall waiting for a part. When a fixture is clean and the body is sound, we repair. When it’s a discontinued or pot-metal body that has already been repaired twice, we recommend replacement rather than chasing a third leak.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Upland
Delta repair and fixture work in Upland usually falls within a predictable range, depending on the job scope. A straight cartridge replacement is a service call with a part. A tub-to-shower conversion or a full shower replacement is a multi-day job with plumbing, wall work, and finish labor. Here are our current ranges for the Delta-related projects we handle most in Upland:
| Project | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives cost in Upland is the house itself. A 1980s ranch with an accessible valve and standard framing is a faster job than a 1920s bungalow with plaster walls and a valve body jammed against a joist. Our free estimate includes a line-by-line breakdown of what we’re doing, so you see the cost before any work starts. Call (833) 467-4075 for an exact quote on your Delta fixture or remodel.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well, and we also offer Delta service in Jurupa Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Upland
Hard water scale builds up inside the Delta cartridge bore and sticks the moving parts of the valve. Upland’s treated water supply carries enough minerals that a Monitor 14 Series cartridge can seize within three to five years. We pull the old cartridge, clean the valve body, and install a genuine Delta OEM replacement. Call (833) 467-4075 and we’ll diagnose it before pulling anything apart.
Usually, yes. We can access most Delta valves through a small plaster or drywall opening, repair or replace the valve, and finish with a removable access panel rather than a full wall rebuild. If the original rough-in is misaligned or installed against framing, as we’ve seen in downtown Upland bungalows, the opening may need to be slightly larger to correct the rough-in. But we don’t tear out a whole wall for a valve replacement.
Brushed nickel and stainless finishes hold up best in Upland, because hard water spots and mineral residue hide better on brushed surfaces than on polished chrome. On kitchen faucets near south-facing windows, the intense inland summer sun fades polished and oil-rubbed finishes faster. We recommend Delta’s SpotShield finishes in brushed nickel for Upland kitchens where sun exposure is a factor.
In most cases, a direct valve swap or cartridge replacement doesn’t require a permit under Upland’s building code, because it’s a fixture replacement on existing plumbing rough-in, not a new installation. If we’re moving the valve location, adding a new shower line, or changing the rough-in, a permit may be required. We pull permits when they’re needed and handle the inspection. Call (833) 467-4075 and we’ll tell you what your specific job requires.
In Upland, it’s usually both, but it starts with debris. If the remodel disturbed galvanized piping or shut off the water main, rust and sediment get knocked loose and clog the cartridge ports and aerator. We clean or replace the cartridge, flush the supply lines, and check the aerator. If the house has original galvanized supply lines, the pressure loss may point to a larger piping issue we can scope. Call (833) 467-4075 and we’ll trace it.
Service Areas Near Upland
Hampton Contractors serves Upland and the surrounding foothill and valley communities. We handle Delta service across Delta service in Rubidoux and Delta service in Glen Avon, plus the broader Upland service area. If you’re in a neighboring city and have a Delta fixture that’s been acting up, reach out. We also work throughout Delta sales & service territory across the Inland Empire.
Book Your Delta Service in Upland Today
If your Delta shower handle is stiff, your kitchen faucet is leaking at the base, or you’re planning a bathroom remodel around a new Delta valve, call us. We’ll schedule a free estimate, look at the fixture and the wall behind it, and give you a written quote before any work starts. Call (833) 467-4075 to book your Delta service in Upland today.
Written by Brent Calloway, Owner at Hampton Contractors, serving Upland, San Antonio Heights Delta service, and the surrounding foothill communities.