Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Bloomington, CA | Hampton Contractors
We install, reface, repair, and re-top CWS cabinetry and countertops across Bloomington, and the one thing that sets our work here apart is that every project runs through San Bernardino County Land Use Services and Building & Safety, not a city hall. That changes permitting, inspection scheduling, and how we handle older parcels with grandfathered structures. If you’re planning a CWS kitchen or bath remodel in Bloomington, call (833) 467-4075 and we’ll tell you what your specific property needs.
Why Bloomington Residents Choose Us for CWS Service
Brent Calloway, our owner, has been doing construction in the High Desert since he was eighteen, and he’ll tell you the same thing he told his Victor Valley College instructors: good work doesn’t need a disclaimer. We run CWS cabinetry every week, so we know how these boxes behave on Bloomington slabs and in Bloomington heat. We stock OEM CWS hinges, glides, and door fronts for faster turnaround, and when a part’s discontinued we’ll say so plainly and give you an honest aftermarket option. One contractor, one project, and no mystery-supplier substitutions. If you want a CWS kitchen that actually fits the way your house sits, we’re who you call in Bloomington.
Styles & brands we work with
Common CWS Construction Problems We Solve in Bloomington
- Toe-kick and sink-base swelling from slab moisture. Bloomington’s older ranch homes sit on shallow slabs with no moisture barrier. Water wicks up, the CWS particle-board box swells at the toe kick and sink base, and suddenly the doors won’t close square. We replace the compromised boxes and match the existing CWS fronts so the run looks original.
- Thermofoil and laminate door delamination on hot walls. Summer highs here push past 100°F, and CWS cabinet fronts facing west or south through single-pane windows take direct heat and UV. The thermofoil lifts, the laminate edge peels, and the drawer pulls feel tacky. We swap the affected doors and often recommend moving to painted or stained wood fronts on those walls.
- Quartz and granite seam separation over shifting floors. The 1920s-to-1950s farmhouse-era homes and post-war ranches in Bloomington often sit on original unlevel slabs, especially where an owner-built addition was tacked on without a permit. Seasonal movement opens countertop seams and chips edges. We re-level the cabinet run, sister the framing, and set the CWS top with a seam that stays put.
- Soft-close hinge and glide failure in tight ranch kitchens. Bloomington’s older east-west roads are lined with compact ranch kitchens where every cabinet door gets opened constantly. Hinges wear out, drawer glides bind, and the soft-close stops catching. We rebuild the hardware and adjust the reveal spacing so everything closes like it should.
- Unpermitted additions that surface during a CWS remodel. We see this in Bloomington more than anywhere else. A previous owner built a garage, a sunroom, an extra bathroom, and never pulled a county permit. Before we can legally install CWS cabinets and counters in that space, the structure has to be identified, inspected, and brought into compliance. We handle that paperwork with San Bernardino County so your project doesn’t stall.
CWS Service in Bloomington: What Local Conditions Mean for Your Equipment
Here’s something a generic CWS page won’t tell you: Bloomington addresses are pulled under San Bernardino County Land Use Services and Building & Safety, not a city building department. That means your CWS kitchen remodel in Bloomington gets permitted and inspected on county timelines, which run differently than what your neighbors in Fontana or Rialto experience. It also means any grandfathered agricultural or unpermitted structure on the parcel, and there are plenty along the older east-west roads in the 92316 zip, has to be identified and legalized before we can add square footage or pull a permit for new cabinet and countertop work. On one post-war ranch home in Bloomington, the original slab had heaved and the sink base had swelled until the doors would not close. We shimmed and sistered the cabinet run, replaced the water-damaged boxes with OEM-matched CWS fronts, and set a new quartz top with a level seam. Then we walked the county inspector through the compliance paperwork for the attached garage the previous owner had built without a permit. That’s the Bloomington difference. We plan for it from the first site visit, so your CWS project doesn’t hit a wall at the inspection stage.
CWS Models & Products We Service in Bloomington
Our crew works with the full CWS Custom Cabinetry line, framed and frameless, plus CWS Bath Vanity Collections, CWS Quartz and Granite Countertop Programs, and CWS Kitchen Island and Pantry Systems. When something fails, we source OEM CWS hinges, glides, and replacement doors wherever they’re available so finishes stay matched across the run. If a line’s been discontinued, we’ll say so and give you a quality aftermarket alternative that doesn’t scream mismatch. For Bloomington turnaround, we keep common CWS hardware on hand and order full door fronts directly. Repair-versus-replace is always an honest call: refacing and re-topping a sound CWS box often beats a full tear-out, but water-swollen particle-board boxes get replaced. No sentimental attachments to a rotten sink base.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Bloomington
Bloomington CWS work falls into predictable ranges based on scope and the condition of the slab and framing underneath. Here’s what we typically see:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the final number in Bloomington is usually what’s hiding under the floor: unlevel slabs, slab moisture, or an unpermitted addition that needs county compliance work before we touch the cabinets. A free estimate includes a full site inspection, so you know the real number before you commit. Call (833) 467-4075 for an exact quote.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Bloomington
Bloomington is unincorporated, so all CWS kitchen and bath remodels are permitted and inspected through San Bernardino County Land Use Services and Building & Safety, not a city building department. County timelines and inspection scheduling differ from what you’d get in Fontana or Rialto. Call (833) 467-4075 and we’ll map out exactly what your permit path looks like.
Usually yes, but the unpermitted structure has to be identified, inspected, and legalized through the county before we can pull a permit for new CWS cabinetry or countertops in that space. We handle that compliance paperwork as part of the project so you’re not left juggling the county on your own. It’s common in Bloomington, and it’s a solvable problem.
The two most common causes here are slab moisture wicking up into the particle-board toe kick and sink base, and 100°F-plus summer heat hitting west- or south-facing cabinets through single-pane windows. The first swells the box, the second delaminates thermofoil and laminate. We fix both by replacing the damaged boxes or doors and addressing the underlying moisture or heat source. Call (833) 467-4075 for an assessment.
Yes. If the box is sound, refacing with new CWS doors, drawer fronts, and matching veneer gives you a new kitchen look without the tear-out cost. If the particle board is water-swollen or crumbling, replacement is the honest call. We’ll tell you which one your Bloomington kitchen needs after a site visit, and we won’t oversell a reface on a box that won’t hold hardware.
Quartz handles Bloomington’s heat and dust better than most natural stone because it’s non-porous, resists staining from the dust that blows in during Santa Ana winds, and doesn’t need annual sealing. Granite works well too if you stay on top of sealing. Both are available through the CWS countertop programs we install. Call (833) 467-4075 to see samples and get a written line-item quote.
Service Areas Near Bloomington
We provide CWS sales & service throughout the Bloomington service area and the surrounding High Desert communities, including Hesperia, Victorville, Apple Valley, and the unincorporated pockets around Spring Valley Lake and Oak Hills. If you’re just over the county line, we cover CWS service in Loma Linda and CWS service in Mentone as well.
Book Your CWS Service in Bloomington Today
If your Bloomington CWS cabinets or counters need service, repair, or a full remodel, call (833) 467-4075 to schedule your free estimate. We’ll walk your property, check the slab, check the permits, and give you a straight answer.
Written by Brent Calloway, Owner at Hampton Contractors, serving Bloomington and the High Desert for over two decades.