Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Rancho Cucamonga, CA | Hampton Contractors
We install and service Mr-Glass shower enclosures, mirrors, and glass panel systems across Rancho Cucamonga as an independent contractor. We’re not a showroom or a manufacturer rep, and we’re not authorized by Mr-Glass. What we are is a local general contractor that sets Mr-Glass enclosures against real Rancho Cucamonga walls every week, including the ones that move. If you’re planning a frameless shower in 91737 or repairing a sliding door that keeps jumping its track in 91730, call (833) 467-4075 for a straight answer and a free estimate.
Why Rancho Cucamonga Residents Choose Us for Mr-Glass Service
Mr-Glass makes a solid enclosure. The framed sliders, the semi-frameless pivots, the 3/8″ frameless lines: the glass is consistent, the hardware is serviceable, and the product handles Southern California water chemistry better than most imports. But an enclosure is only as good as the wall it’s anchored to, and that’s where our local experience in Rancho Cucamonga changes the conversation. Brent Calloway has been reading walls and footings since he was eighteen, and the crews he runs now know that a square frame on a shifting foothill wall will still sag out of plumb. We check plumb before we set glass. We anchor into blocking, not drywall. We stock the replacement rollers, hinges, and seal kits that keep a Mr-Glass in Ontario or Rancho Cucamonga door closing clean. And because we’re a full-scope general contractor rather than a glass-only shop, we can address the tile, the waterproofing, and even the framing behind the enclosure in the same visit.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Rancho Cucamonga
- Sliding doors jumping the bottom track. Rancho Cucamonga’s water is hard. Inland Empire mineral scale packs into the bottom tracks of Mr-Glass framed sliders, the rollers seize, and the door hops the rail. We pull the door, clean the track, replace the rollers with genuine Mr-Glass parts when available, and set the alignment so the door rolls instead of drags.
- Semi-frameless pivot hinges loosening on foothill lots. Up in 91737 and 91739, expansive soils shift footings by fractions of an inch. That’s enough to transfer stress into hinge hardware. We see pivot panels sagging out of plumb more often on hillside homes than anywhere on the valley floor. We re-anchor into solid blocking and reset the receiving channel before adjusting the hinge.
- Factory seals failing under heat cycles and Santa Ana winds. Mr-Glass factory caulk and seals take a beating here. Summer heat bakes the silicone, then a Santa Ana event flexes the frame, and water starts escaping toward tile or drywall. We cut out the old seal and re-bed the frame against a properly prepped surface.
- Cheap aftermarket wall anchors pulling out of postwar tract framing. The 91730 and 91701 homes from the ’60s through the ’80s often have thin studs and older drywall. Hardware-store anchors just don’t hold. We open the wall where needed, add blocking between studs, and mount the channel so the glass doesn’t wobble when someone leans on it.
- Glass scratches and pitted frame channels. Hard water also means mineral etching on glass and corrosion on aluminum channels over time. If a Mr-Glass frame is pitted or the glass is scratched beyond polishing, we quote replacement honestly instead of chasing a repair that won’t hold.
Mr-Glass Service in Rancho Cucamonga: What Local Conditions Mean for Your Equipment
Rancho Cucamonga splits into two very different construction zones, and that split dictates how we approach every Mr-Glass install. The valley floor across 91730 and 91701 is flat, built on alluvial fan soils that have been settling for fifty-plus years under postwar tract homes. Walls there are generally predictable, though the framing itself can be thin by modern standards. But head north into 91737 and 91739, up toward the San Gabriel Mountain foothills, and you’re on expansive soils and slopes where builders deal with drainage and grading requirements that valley-floor contractors never touch. A Mr-Glass service in Fontana or Rancho Cucamonga enclosure framed against a slightly racking foundation transfers stress to the door hinges far more than a valley-floor install in 91730 ever would. We check wall plumb and footing before setting glass, because a square frame on a moving wall still fails. It’s the difference between an enclosure that closes true for a decade and one that starts leaking at the hinge line after the first wet winter.
Mr-Glass Models & Products We Service in Rancho Cucamonga
We work across the Mr-Glass catalog that matters for residential bathrooms here: framed sliding shower doors, semi-frameless pivoting enclosures, frameless 3/8″ glass enclosures, and custom-cut mirror and glass panel systems. On the parts side, we source genuine Mr-Glass rollers, hinges, and seal kits whenever the supply line has them. When an OEM part is discontinued or backordered, we spec quality aftermarket glass and hardware, and we’ll tell you that’s what we’re doing before we do it. For Rancho Cucamonga turnaround, we keep common roller sets, hinge bushings, and seal profiles on the truck so a track repair or seal job doesn’t wait on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Rancho Cucamonga
Pricing for Mr-Glass work in Rancho Cucamonga follows the job type, not the ZIP code. A frameless enclosure tied into a walk-in shower runs $4,500 to $12,000 depending on glass thickness, hardware finish, and whether we’re doing tilework and waterproofing behind it. A shower replacement lands from $3,000 to $8,500. A tub-to-shower conversion with a Mr-Glass door runs $3,500 to $10,000. If you’re updating a vanity alongside, budget $800 to $3,000 for that line item. A free estimate gets you line-by-line numbers, not a lump sum. Call (833) 467-4075 and we’ll measure, check the wall, and price it honestly.
| Mr-Glass Service | Rancho Cucamonga Price Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Serving Rancho Cucamonga, CA — Our Local Coverage Area
We’re based in the Rancho Cucamonga area and also provide Upland Mr-Glass service, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Rancho Cucamonga
Yes, if the wall is prepped correctly. We check plumb and footings before setting glass, re-anchor into solid blocking, and use hardware that tolerates minor movement without transferring stress to the glass. On a hillside ranch home up toward 91739, our crew replaced a sagging semi-frameless Mr-Glass pivot enclosure where the wall had racked just enough to throw the door out of plumb. We re-set the receiving channel, re-anchored into solid blocking, and swapped in a fresh hinge and seal kit so the panel closed clean against the tile. The homeowner got a dry floor and a door that stayed true through the next hot swing. Call (833) 467-4075 for a free wall assessment before you order glass.
Nearly always, it’s mineral scale from the hard Inland Empire water packing the bottom track and seizing the rollers. Once a roller locks up, the door drags, then hops the rail. We disassemble the door, clean the track, replace the rollers with genuine Mr-Glass parts when available, and reset alignment. Give us a call at (833) 467-4075 and we’ll get it rolling before the track gets chewed up.
Yes, and it’s one of the more common jobs we do in the older neighborhoods. The framing in those ’60s-to-’80s homes is often thinner than modern code, so we open the wall at the shower surround, add blocking behind the valve and glass channel, and waterproof the whole wet zone before tile and glass go in. A tub-to-shower conversion with a Mr-Glass enclosure runs $3,500 to $10,000 in this market. Call (833) 467-4075 for exact measurements on your bathroom.
We source genuine Mr-Glass rollers, hinges, and seal kits when the supply line has them. When an OEM part is discontinued or backordered, we spec quality aftermarket glass and hardware, and we tell you that before the work starts. You won’t find out about a substitution after the install. For most Rancho Cucamonga service calls, we keep common rollers and seal profiles on the truck, so backorders rarely stall a repair.
It depends on the glass and the frame. Light mineral etching can sometimes polish out. Deep scratches and pitted aluminum channels usually mean replacement is the honest call, because a repair won’t hold up under this climate’s hard water and heat cycles. We quote both paths and tell you which one we’d do in our own bathroom. Call (833) 467-4075 for a level-headed assessment.
Service Areas Near Rancho Cucamonga
Hampton Contractors covers Rancho Cucamonga and the surrounding High Desert and Inland Empire communities. We also run Mr-Glass service and installation in Mr-Glass service in Highgrove and Mr-Glass service in Sunnyslope, plus Hesperia, Spring Valley Lake, Oak Hills, Mountain View Acres, Victorville, and Apple Valley. Our broader Rancho Cucamonga service area coverage means we’re on site quickly without a long dispatch window from a distant shop. For the full picture on our Mr-Glass work, see Mr-Glass sales & service.
Book Your Mr-Glass Service in Rancho Cucamonga Today
A leaking enclosure or a door that won’t stay on its track doesn’t get better with time. Call (833) 467-4075 and we’ll schedule a free estimate, check the wall and the track, and give you a number you can build a decision on. Good work doesn’t need a disclaimer.
Written by Brent Calloway, Owner at Hampton Contractors, serving Rancho Cucamonga and the High Desert since 1999.