Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Colton, CA | Hampton Contractors
We provide independent Ameristar service across Colton’s 92324 ZIP, from roof replacements and equipment pad work on older rail-town bungalows to full kitchen and bath remodels in newer subdivisions. What sets our Ameristar work here apart is that we know exactly how this equipment fails under Colton’s particular conditions: Inland Empire UV, Santa Ana wind loading, and the dust that freight-corridor truck traffic kicks up every day. Call (833) 467-4075 to schedule a free estimate with Brent Calloway and our crew.
Why Colton Residents Choose Us for Ameristar Service
Brent Calloway has been working construction in the High Desert since he was eighteen, and he’s spent years handling Ameristar equipment on Colton job sites. We’re not a manufacturer dealership. We’re a full-scope general contractor that specifies, installs, and repairs Ameristar assemblies because they’re solid equipment when they’re set correctly, wired correctly, and protected from what Colton throws at them. We use OEM Ameristar parts for anything touching refrigerant circuits, controls, or structural panel integrity. Commodity items like fasteners and weatherstripping get quality aftermarket equivalents. That’s the honest way to spec a job, and it’s how we’ve built our reputation around here. See our full Ameristar sales & service capability and what we handle across the board.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Colton
These are the issues we see most often on Ameristar equipment and building assemblies in Colton, and each one ties back to something specific about this city’s climate, housing stock, or industrial traffic patterns.
- Sun-degraded exterior panel coatings and gaskets on packaged rooftop units. Colton gets hammered by Inland Empire UV all summer, and Santa Ana wind events strip sealant fast. We replace the gaskets, re-coat the panels, and set the unit so it drains correctly before the next dry season hits.
- Condenser coil corrosion and fin damage on Ameristar split systems. Colton dust is relentless, and warehouse truck traffic along the I-10/I-215 corridors keeps airborne particulates high. Coils that aren’t rinsed seasonally clog up and drop efficiency. We clean, repair, or replace coils depending on how far the damage goes.
- Cabinet and enclosure hardware loosening on commercial Ameristar units. Thermal cycling between 100°F-plus days and cool desert nights works fasteners and panel seams loose. We re-torque, re-seam, and add vibration isolation where the unit sits near truck routes.
- Undersized or degraded disconnect and control wiring on remodels. Colton’s older bungalows near the historic downtown often still have original service panels that were never upgraded to match added load. We find this constantly when we open walls for a kitchen or bath remodel and the Ameristar equipment is running on wiring that predates the current draw.
- Rotted or failing equipment curbs and pads on flat and low-slope roofs. Occasional winter rains expose drainage problems on older Colton roofs, and a unit sitting on a rotted curb doesn’t drain, doesn’t seat, and starts eating through fasteners. We pull the unit, fix the curb or pour a proper pad, and reset it with new OEM gaskets.
Ameristar Service in Colton: What Local Conditions Mean for Your Equipment
Colton sits at the heart of the Inland Empire’s logistics belt, where the old Southern Pacific rail-town residential grid butts directly against massive warehouse and distribution development along the I-10 and I-215 corridors. That dual market shapes every Ameristar in Grand Terrace and Colton job we do here. In Colton’s older rail-town core, excavation and foundation work routinely turns up buried rail-era debris, old sumps, and undocumented utility lines, which means any Ameristar equipment pad, curb, or roof penetration we set has to be located and verified against what is actually underground before we cut, not against the record drawings. Meanwhile, on the commercial and industrial fringe near the freeway corridors, dust-control rules and truck traffic mean equipment enclosures and roof assemblies take a beating that neighboring cities simply don’t see at the same intensity. We plan for both realities on every Colton job.
Ameristar Models & Products We Service in Colton
We work on the Ameristar M4 series packaged gas/electric units, the V-Series split system air conditioners, and 95% AFUE gas furnaces, plus Ameristar metal building and roof panel assemblies. For faster Colton turnaround, we keep common OEM gaskets, disconnect components, and panel hardware stocked locally, so we’re not waiting on a shipment from a regional distributor every time a unit needs a reseal or a control swap. On older Ameristar units with a failed compressor or a rusted-through cabinet, we price the repair against replacement honestly rather than patching a unit that will fail again next summer. Good work doesn’t need a disclaimer.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Colton
Here’s what Ameristar-related construction work typically costs in Colton, based on the scope of the project and the condition of the existing equipment or assembly. These are market-calibrated ranges, not final quotes.
| Project | Typical Colton Range |
|---|---|
| Roof Replacement (including Ameristar roof penetrations or curbs) | $8,000 – $20,000 |
| Roof Repair (flashing, gasket reseal, small penetration work) | $400 – $1,800 |
| Full Kitchen Remodel (with new Ameristar equipment pad or wiring as needed) | $14,000 – $45,000 |
| Bathroom Remodel (with any equipment relocation or vent work) | $9,000 – $28,000 |
What drives the cost in Colton is whether we’re dealing with an older bungalow near the rail corridor with undocumented utility lines and buried debris, or a newer build on the industrial fringe with simpler access. Our free estimate includes a written line-item quote, and we don’t change the price once work starts. Call (833) 467-4075 for exact numbers on your project.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Colton
No. We’re an independent general contractor that works on Highgrove Ameristar service and equipment across Colton. No manufacturer affiliation, which means our recommendations come from what we’ve seen perform in this ZIP, not from a dealer program pushing a particular product line.
Yes, for anything affecting refrigerant circuits, controls, or structural panel integrity. We use quality aftermarket parts only for commodity items like fasteners, filters, and weatherstripping. If a part needs to be OEM to keep the unit safe and reliable, we don’t substitute. Call (833) 467-4075 and we’ll tell you exactly what your job needs.
Most equipment repairs and panel or gasket work is done same day, since we stock common parts locally. A full remodel that involves relocating an Ameristar unit or rebuilding a curb and pad runs multiple days to weeks depending on the scope. We give you a schedule in writing before we start.
We cover the M4 series packaged gas/electric units, V-Series split system air conditioners, and 95% AFUE gas furnaces, along with Ameristar metal building and roof panel assemblies. If you have an older or less common Ameristar unit, call (833) 467-4075 and we’ll tell you what we can do.
Roof repair with Ameristar gasket or flashing work runs $400 to $1,800. A full roof replacement that includes Ameristar curb or penetration work runs $8,000 to $20,000. Kitchen remodels with new equipment pads or wiring run $14,000 to $45,000. Bathroom remodels run $9,000 to $28,000. Call (833) 467-4075 for an exact quote, and we’ll walk the job with you free.
On a bungalow remodel near the historic downtown rail corridor, our crew found the Ameristar service in Rubidoux and Colton packaged unit sitting on a rotted curb that had been shimmed over old debris rather than a real pad. We pulled the unit, cleared the buried rail-era material, and poured a proper level pad before resetting it with new OEM gaskets and disconnect wiring. The homeowner got a unit that sits flat and drains correctly going into the next Santa Ana wind season, instead of one rocking on a patched curb. That’s the kind of thing you only catch when you actually dig into what’s underneath, and it’s the kind of thing we look for on every Colton job.
It depends on what’s actually wrong. If the compressor has failed or the cabinet is rusted through, replacement usually costs less over the next two summers than patching a unit that will fail again in Colton heat. If it’s gaskets, wiring, or hardware, repair makes sense. We’ll give you the numbers both ways and let you decide. Call (833) 467-4075 and we’ll price it out free.
Service Areas Near Colton
We serve all of Colton’s 92324 ZIP and the surrounding High Desert and Inland Empire communities, including Colton service area coverage, Ameristar service in Bloomington, Ameristar service in Loma Linda, plus Hesperia, Victorville, and Apple Valley when the job calls for our full-scope contracting range.
Book Your Ameristar Service in Colton Today
Call (833) 467-4075 to schedule your free estimate. We’ll walk your Colton property, check what’s actually underground if we’re cutting or pouring, and give you a written line-item quote with no price changes once work starts.
Written by Brent Calloway, Owner at Hampton Contractors, serving Colton since 2005.