Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Running Springs, CA | Hampton Contractors
We provide independent CWS cabinet installation, repair, and kitchen remodeling across Running Springs and CWS service in Crestline, and the one thing that separates our CWS work here from the rest of the mountain is simple: we treat slope movement, freeze-thaw swing, and tight delivery access as design conditions, not afterthoughts. If your CWS cabinets are swelling, racking, or peeling, we’ll tell you whether it’s moisture, foundation shift, or just age, and what a real fix costs. Call (833) 467-4075. We’re Hampton Contractors, and we’ve been doing this kind of work long enough to know that a mountain cabinet failure rarely has one cause.
Why Running Springs Residents Choose Us for CWS Service
Running Springs homes throw problems at cabinetry that flatland installers never see. Freeze-thaw cycles push moisture into particleboard boxes. Pier-and-post foundations settle and torque cabinet runs out of square. Steep, narrow drives turn a routine cabinet delivery into a staging exercise. Most contractors learn those lessons the hard way, one callback at a time. We’ve spent years working CWS cabinetry and finish products in mountain homes, so we know how these boxes, door styles, and finishes hold up under Running Springs conditions. As an independent contractor we repair, reconfigure, and replace CWS installations on their own merits – no manufacturer authorization implied. Brent Calloway, our owner, started in construction in the High Desert at eighteen and has carried that same direct, material-specific approach to every mountain job since. He’ll tell you what’s fixable and what’s not, in plain numbers, before a single tool comes off the truck. CWS sales & service is only as good as the person standing behind the diagnostic.
Styles & brands we work with







Common CWS Construction Problems We Solve in Running Springs
- Swollen particleboard boxes at 5,000-plus feet. Snowmelt finds its way into cabins, and when roof leaks or ice dams push moisture into cabinet interiors, particleboard and MDF boxes swell and joints separate. We see this most often in older Running Springs cabins where original CWS raised-panel oak runs sit against exterior walls. The fix is usually box replacement plus sealing, not just a new door.
- Painted and thermofoil door faces peeling from freeze-thaw cycling. Low winter humidity followed by sudden warming stresses the bond on painted and thermofoil CWS door fronts. Peeling at the edges and delaminating across flat panels is a Running Springs signature, especially on south-facing walls that warm faster after cold nights. We match door styles and refinish or replace as the damage warrants.
- Hinge and drawer-glide failure as the ground moves. Pier-and-post foundations on graded slopes shift seasonally. That movement racks cabinet face frames and gradually pulls hinges and glides out of alignment. A drawer that binds in November and slides free in March isn’t a fluke – it’s the mountain settling under a 40-year-old cabin.
- Out-of-square cabinet runs and failed countertop seams. When slope movement torques an otherwise sound CWS installation, doors stop closing square and quartz or granite seams crack along the stress line. We re-level and shim the run before resetting the top. Patching the seam without fixing the racking just moves the problem a foot down the counter.
- Tight-lot delivery damage before the cabinets even go in. CWS cabinets that arrive fine on the truck can get banged up when the driveway won’t take a box truck and everything has to be hand-carried or craned up a slope. We stage deliveries in Running Springs differently from day one, which means fewer dinged corners and fewer excuses.
CWS Service in Running Springs: What Local Conditions Mean for Your Equipment
Because so many Running Springs lots are steep, narrow, and access-limited on winding mountain roads, cabinet and countertop deliveries often have to be staged and hand-carried or craned to the door. A slab or a full cabinet run that arrives on one flatbed down the hill in Hesperia has to be planned differently here, just as CWS repair in Highland requires its own logistics, and that planning starts before the order is even placed. We work backward from the driveway: what the truck can reach, where material can sit, who’s carrying what up which set of stairs. On a graded slope lot off the mountain roads near Running Springs, our crew took on a mid-century cabin kitchen where the CWS oak cabinet boxes had swelled and racked as the pier-and-post foundation shifted through freeze-thaw. We re-leveled and shimmed the run, replaced water-damaged boxes and doors with matching CWS-compatible fronts, and set a new quartz top over the squared-up cabinets – then staged the delivery by hand because the truck couldn’t back up the narrow drive. That’s the job. If you’re in the 92382, that’s your job too.
CWS Models & Products We Service in Running Springs
We work on the full range of CWS product lines: Shaker-style painted and stained kitchen cabinet lines, raised-panel oak and maple door styles common in older mountain cabins, plywood-box base and wall cabinet runs with adjustable shelving, CWS in Mentone, and CWS bathroom vanity cabinet lines paired with quartz or granite tops. When OEM components are discontinued or slow to arrive, we match CWS-compatible doors, drawer boxes, hinges, and glides from quality aftermarket suppliers. Where the door style or finish has to stay consistent, we source OEM. And we’re honest about the third category: when a swollen, out-of-square cabinet run is better replaced than patched, we say so in the estimate, not halfway through the tear-out. That candor matters in Running Springs, where moisture and foundation movement are usually the root cause and a patch job just puts the problem off a season.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Running Springs
What drives the cost on a Running Springs CWS job? Three things: access, condition, and scope. A steep driveway that requires hand-carrying adds labor. Cabinets that have been racking for ten years cost more to true up than boxes that shifted last winter. And a full kitchen remodel obviously lands differently than a cabinet reface or island install. Here are our current price ranges for CWS-related work:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate means we come out, look at what you’ve got, and give you a written line-item quote before any work starts. Call (833) 467-4075 to schedule yours.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well, and we also provide CWS repair in Lake Arrowhead. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Running Springs
My CWS cabinet doors are peeling on a Running Springs cabin – repair or replace?
If the peeling is limited to a few door fronts and the boxes underneath are still square and dry, we can repair or refinish the doors individually. If the peeling is widespread or the boxes show swelling at the joints, replacement usually costs less over time because you’re not paying for a fix that fails again next freeze-thaw season. Call (833) 467-4075 and we’ll look at what you’ve actually got.
Can you get a full cabinet and countertop delivery up a steep, narrow Running Springs driveway?
Yes. We stage deliveries based on the actual driveway, not the order sheet. That means hand-carrying, craning, or splitting a load when the truck can’t back up to the door. We plan the delivery route before materials are ordered, so the cabinets don’t arrive on a truck that has nowhere to go.
Why are my CWS cabinets out of square in this mountain home?
Slope movement and pier-and-post foundation settling are the usual causes. As the ground shifts through freeze-thaw cycles, the foundation moves, and the cabinet run racks with it. Doors stop closing square, seams open, and glides bind. The fix starts with releveling the run and shimming the boxes, then assessing what the foundation is doing underneath.
What countertop works over CWS cabinets in a freeze-thaw climate?
Quartz and granite both hold up well at Running Springs elevations if the cabinet run underneath is stable. The failure point is usually the cabinet movement, not the stone itself. Once the boxes are squared and shimmed, a properly set quartz or granite top will handle the temperature swings without issue. Call (833) 467-4075 for an exact recommendation based on your kitchen.
Do you handle small kitchen updates on a CWS install, not just full remodels?
Yes. We do cabinet refacing, island installs, countertop replacement, backsplash work, and hardware swaps without pushing you into a full gut. Small kitchens in Running Springs cabins often just need the boxes squared, the doors matched, and a new top, and we price that as a small kitchen remodel, not a sales pitch.
Service Areas Near Running Springs
We also provide CWS service in Muscoy for clients down the mountain, and CWS service in Wrightwood on the other side of the range. We cover Running Springs service area customers throughout the 92382, plus Hesperia, Spring Valley Lake, Oak Hills, Mountain View Acres, Victorville, and Apple Valley. If you’re in the mountains or just off the hill, we’ll bring the same approach.
Book Your CWS Service in Running Springs Today
Good work doesn’t need a disclaimer. Call (833) 467-4075 to schedule a free estimate on your CWS cabinet or kitchen project in Running Springs. Brent and the crew will come out, take a real look, and put the numbers in front of you.
Written by Brent Calloway, Owner at Hampton Contractors, serving Running Springs and the San Bernardino Mountains since he first picked up a hammer in the High Desert.