Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Bernardino, CA | Hampton Contractors
We’re Hampton Contractors, and we provide independent Dvele construction service across San Bernardino, CA. We’re not a Dvele dealer or factory affiliate. What we are is the crew that chases the interface problems on Dvele homes – panel seams, roof-to-wall transitions, and foundation connections – that other remodelers either miss or misdiagnose. Call (833) 467-4075 for a free estimate on any Dvele repair or renovation scope.
Most Dvele problems we see in San Bernardino are enclosure and site-interface failures, not factory defects. The house was built tight in a factory. The ground it sits on and the wind that hits it are San Bernardino’s. That gap between factory precision and local weather is where we work.
Why San Bernardino Residents Choose Us for Dvele Service
Dvele homes are panelized and factory-finished, which means the factory did its job before the house ever touched San Bernardino dirt. What happens after – at the roof-to-wall transition, the module-to-foundation connection, the panel seams – is site work. We’ve spent years chasing those interfaces on Dvele homes across the Inland Empire, and that’s a different skill set than remodeling a stick-built tract house from the 1960s.
Brent Calloway, who runs Hampton Contractors, has been working construction in the High Desert since he was eighteen. He grew up just off Ranchero Road in Hesperia, so he knows exactly what the Cajon Pass does to a roofline. He’s also the one you’ll talk to about your Dvele repair scope, not a rotating estimator. Good work doesn’t need a disclaimer.
We carry OEM-spec or equivalent-rated flashing, sealant, and envelope components matched to Dvele’s panel and weather-barrier systems. No cheaper sealant substituted because it’s what the supply house had on the shelf. If you own a Dvele home in San Bernardino, you need a contractor who treats your envelope’s fire and wind ratings as something not to void.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Bernardino
- Panel seam and flashing failures at roof-to-wall transitions. Dvele’s high-performance envelope leaves almost no room for sloppy site-sealed joints. After a Santa Ana wind-driven rain, leaks show up as ceiling staining near module lines. We re-detail the flashing joint, not just caulk over it.
- Soffit, fascia, and trim uplift on windward roof edges. Homes in San Bernardino’s foothill and north-end neighborhoods take the brunt of Cajon Pass gusts. Dvele’s shallow-pitch roofs leave less overhang to shed wind, so the uplift lands on fascia and edge metal. We see lifted fascia and opened flashing joints after one strong wind event.
- Settlement or hinge-point cracking at the module-to-foundation connection. San Bernardino sits on alluvial fan and fault-adjacent ground. That means drywall cracks, sticking doors, and gapping at panel joints near interior partition walls. Not every crack is a foundation failure – sometimes it’s the hinge point between modules. We diagnose before we demo.
- Weather-barrier and sealant deterioration on south- and west-facing walls. San Bernardino’s hot, dry summers plus wildfire-interface ember exposure age exterior sealant faster than most homeowners expect. We replace deteriorated sealant with rated materials matched to the original spec.
- Roof-to-wall flashing leaks after wind-driven rain. This is the Dvele-specific version of a roof leak. The problem isn’t the roof membrane. It’s the joint where the panel roof system meets the wall assembly, and it fails exactly where the wind hits hardest.
Dvele Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino’s older foothill and north-end neighborhoods sit where the Cajon Pass funnels gusts straight at roof edges. Dvele’s shallow-pitch, panel-built roofs leave little overhang, so the uplift load lands directly on the fascia and the roof-to-wall flashing joint rather than on deep eaves that shed wind. That’s not a generic roof problem – it’s a geometry problem specific to this brand in this city. A stick-built rancher with a standard overhang sheds that wind. A Dvele panel roof takes it head-on at the edge metal.
On a Dvele in Highland up in the foothill neighborhoods off the north end, one strong Santa Ana event lifted fascia along the windward edge and opened the roof-to-wall flashing joint. The homeowner found ceiling staining on the first rain after. Our crew pulled the damaged fascia, re-detailed the flashing with wind-rated sealant and new edge metal, and verified the panel joints along the same wall. No interior demo. The roof has held through two wind seasons since.
That’s the failure mode every roofer in San Bernardino knows from stick-built homes, but on a Dvele it shows up differently – tighter envelope, less tolerance for a sloppy repair, and a flashing detail that has to be wind-rated to begin with. If a contractor treats it like a standard fascia repair, the leak comes back.
Dvele Models & Products We Service in San Bernardino
We service the full Dvele line: single-story and two-story modular home lines, Dvele accessory dwelling unit (ADU) programs, prefabricated wall and roof panel assemblies including rough openings, sheathing, and weather barrier, and Dvele high-performance envelope packages with continuous exterior insulation and rainscreen detailing.
Our parts approach is straightforward. We match Dvele panel, flashing, and envelope components to OEM-spec or equivalent-rated assemblies. When a leak or crack is localized to one seam or one edge, we repair and re-detail it rather than pitching a full re-roof or re-panel. Replacement only makes sense once the substrate or sheathing itself is compromised. That’s a judgment call a lot of contractors don’t want to make, but it saves San Bernardino homeowners real money. Our Dvele sales & service work is built on that philosophy.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Bernardino
Here’s what we quote for the roofing scopes most Dvele owners in San Bernardino call us about. These are honest ranges – the final number depends on the condition of the substrate, the length of the affected edge, and whether the panel joints themselves need re-detailing.
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement & Installation | $8000 – $20000 |
| Metal Roofing | $15000 – $40000 |
| Gutters & Accessories | $800 – $2500 |
A Dvele repair in Loma Linda or nearby usually lands on the lower end of the roof repair range for a localized panel seam fix. If the sheathing under the panel is compromised, you’re into replacement territory. Call (833) 467-4075 for a free estimate – we’ll tell you which one you actually need.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Bernardino
Most Dvele panel roofs hold up structurally to San Bernardino’s wind events. What fails is the edge detail – fascia, soffit, and the roof-to-wall flashing joint – not the panel assembly itself. We repair and re-detail those edges before recommending a full metal re-roof. Metal roofing ($15000 – $40000) makes sense on Dvele homes with repeated edge failures or where wildfire-interface ember exposure is a concern. Call (833) 467-4075 and we’ll assess your roofline before you spend that kind of money.
On San Bernardino’s alluvial fan and fault-adjacent ground, most panel-joint cracks and sticking doors are settlement at the module-to-foundation connection, not a structural foundation failure. Dvele homes are built as factory modules joined on site, and the hinge point between modules moves more than the foundation itself. We diagnose the connection before any demo. The fix is often re-detail and re-shim, not foundation work.
We handle Dvele service in Muscoy and across the county: weather-barrier replacement, sealant re-detailing on south- and west-facing walls, flashing repair at roof-to-wall transitions, and soffit/fascia replacement with ember-resistant assemblies. San Bernardino’s wildfire-interface code requirements mean your exterior envelope has to actually function, not just look sealed. We match Dvele’s original spec so your fire ratings stay intact.
A localized Dvele panel seam or flashing repair in San Bernardino typically runs $400 – $1800. A full roof replacement on a Dvele panel roof runs $8000 – $20000, depending on the scope and whether you’re converting to metal. If the leak is one seam and the sheathing is dry, you don’t need a replacement. Call (833) 467-4075 for a free estimate – we’ll show you the seam before we quote the roof.
You don’t need to call the factory. We match Dvele panel, flashing, and envelope components to OEM-spec or equivalent-rated assemblies from our own supply lines. That includes edge metal, weather-barrier materials, and sealants rated for Dvele’s continuous insulation and rainscreen systems. No factory order, no six-week wait. We keep the parts stocked for San Bernardino turnaround.
Service Areas Near San Bernardino
We serve San Bernardino and the surrounding High Desert and Inland Empire communities. Our San Bernardino service area covers the ZIPs and neighborhoods around the foothills, the north end, and the central corridors. We also run Dvele service calls to Dvele service in Silver Lakes, Dvele service in Rialto, Hesperia, Apple Valley, and Victorville. If your Dvele home is within an hour of San Bernardino, we’ll take the call.
Book Your Dvele Service in San Bernardino Today
If your Dvele home has a leak, a crack, lifted fascia, or a sticking door, don’t wait for the next Santa Ana event to make it worse. Call (833) 467-4075 and we’ll schedule a free estimate. We’ll tell you what’s actually wrong, what it costs to fix, and whether it’s a repair or a replacement. No pressure, no up-sell – just a straight answer from a crew that knows San Bernardino’s wind better than most.
Written by Brent Calloway, Owner at Hampton Contractors, serving San Bernardino and the Inland Empire.