Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Rialto, CA | Hampton Contractors
We provide independent Dvele construction and finishing service across Rialto’s two ZIP codes, 92376 and 92377, handling everything from foundation-set module assembly to full interior finish work. What makes our Dvele work different here is simple: we build these panelized homes on both sides of Rialto’s wind-uplift line, so we already know which fastening and sealing schedule your lot needs before the first module arrives. Call (833) 467-4075 to talk through your project or schedule a free estimate.
Why Rialto Residents Choose Us for Dvele Service
Dvele’s panelized system demands a contractor who understands where the factory envelope stops and site work takes over. Brent Calloway has been running crews in the High Desert for over two decades, and that experience translates directly to Dvele construction in Rialto, where the module joints, MEP chases, and finish schedules need to be handled by people who’ve watched how these homes behave after a full Inland Empire summer. We’re not a Dvele representative and we won’t pretend to be one. We’re an independent contractor and General Contractor in Rialto who works the Dvele system because it’s well-engineered, and because Rialto homeowners keep asking for it in both the flat-lot core and the foothill edge.
Our crews work Dvele sales & service projects from crane set through final trim, so we source OEM-consistent connectors, gaskets, and structural hardware rather than swapping in generic parts that undercut the envelope logic. When finish items need replacement, we use quality aftermarket equivalents that match spec. That’s the honest approach: seal, flash, and re-grade a Dvele home before anyone talks about replacing it. Full rebuilds are rarely warranted, and we’ll tell you straight when a repair genuinely won’t hold.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Rialto
- Site-interface leaks at module joints. Factory gaskets and sealants get compromised during transport or crane set, and Rialto’s summer heat bakes the sealant before the shipping wrap comes off. We re-seal module-to-module and module-to-foundation joints to stop water tracking under the floor system.
- Stucco cracking and fastener back-out on panelized walls. The Cajon Pass funnels Santa Ana winds hard into 92377 lots with open exposure toward the foothills. We re-secure panel fasteners and repair cladding breaks using the wind-uplift detailing that side of Rialto requires.
- Drainage and grade failures at the base of Dvele homes. Alluvial fan soils across Rialto don’t shed water the way compacted valley clay does. After seasonal flash storms, water tracks under the floor system when site drainage hasn’t been regraded to the panel edge. We fix the grade, not just the symptom.
- Interior finish movement after the first hot season. Dvele’s factory-drywall and cabinet assemblies acclimate to 100°F-plus Rialto summers differently than stick-built interiors. Drywall seams, trim gaps, and cabinet-door misalignment show up within the first year. We correct them so the home settles properly.
- Roof-edge and penetration issues in the northern WUI zone. Wind-driven rain finds unsealed penetrations, and ember-resistant detailing sometimes never gets finished. We re-flash penetrations and complete the WUI details that 92377 lots near the foothill edge are expected to have.
Dvele Service in Rialto: What Local Conditions Mean for Your Equipment
Rialto’s two ZIP codes sit on opposite sides of the same construction reality, and this matters more for Dvele owners than almost anything else. The 92376 postwar flat-lot tract core and the 92377 foothill-adjacent subdivisions are a mile apart, but they fall under different wind-uplift and WUI detailing expectations. The same Dvele wall and roof assembly needs different fastening and sealing schedules depending on which side of that line your lot sits on. A module set onto a flat 1950s-era lot near downtown Rialto doesn’t face the same sustained wind loading as one set on an open slope up toward the foothill edge, where Santa Ana gusts work panel fasteners and module gaskets loose over time. We’ve seen this play out on a Dvele modular home up toward the foothill edge of north Rialto (92377), where a Santa Ana wind event lifted shingles along the ridge and drove rain into an unsealed vent penetration, staining the panelized ceiling below. We pulled the affected roofing, replaced the compromised underlayment and penetration flashing to the wind-uplift detailing that side of town requires, reset the ridge, and resealed the module joint where the wind had worked the gasket loose. That’s the difference between a crew that knows Rialto and one that’s just following a standard Dvele install checklist.
Dvele Models & Products We Service in Rialto
We build and finish the full Dvele lineup across Rialto: the customizable single-family modular line, two-story prefab configurations, the Dvele ADU prefab line, and panelized structures finished on-site. Our parts approach is straightforward. We source Dvele-consistent OEM and spec-matched components for panel connections, gaskets, and structural hardware, and we keep common connectors and sealants stocked locally so Rialto turnaround doesn’t stall waiting on freight. Non-structural finish items get quality aftermarket equivalents that match the original spec, never mystery-supplier substitutions.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Rialto
What you’ll pay depends on which Rialto lot conditions apply to your Dvele home, the scope of the repair or finish work, and whether we’re correcting site-interface issues or handling interior finish schedules. Here’s what we see across Rialto:
| Service | Typical Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Kitchen Remodel | $14000 – $45000 |
| Bathroom Remodel | $9000 – $28000 |
Every estimate is free and comes as a written line-item quote, so you’ll see exactly what’s included before any work starts. Call (833) 467-4075 to get one scheduled.
Serving Rialto, CA — Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Rialto
Yes, typically it does, because 92377 lots near the foothill edge require additional wind-uplift fastening, WUI detailing, and drainage work that flat-lot 92376 sites don’t need. The difference usually shows up in roofing, cladding, and site-grade scope rather than in the Dvele modules themselves. Call (833) 467-4075 for an exact quote based on your specific lot conditions.
On Rialto’s alluvial fan soils, water showing up at the base of your Dvele home after a storm almost always points to site drainage that wasn’t regraded to the panel edge. The factory envelope is designed to shed water, but if grade slopes toward the floor system instead of away from it, water tracks under the panels. We fix the grade first, then check the module-to-foundation joint for sealant gaps. Call (833) 467-4075 and we’ll take a look.
Most of the time, yes. Wind-damaged Dvele panelized walls in Rialto usually show up as fastener back-out, cracked stucco, or loosened module gaskets, all of which we can re-secure and re-seal without pulling the panel. Full panel replacement is rare, and we’ll tell you honestly if what you’ve got can be repaired or if replacement genuinely makes more sense.
Yes, in a few specific ways. Dvele’s factory-set MEP chases mean plumbing and electrical routing follows predetermined paths, so moving a sink or adding circuits takes more planning than in a stick-built home where we can fish lines anywhere. The finish work itself, cabinets, tile, countertops, is the same trade work. We’ve done full kitchen and bathroom remodels in Dvele homes across Rialto, so we plan around the chases from day one.
No. Hampton Contractors is an independent contractor, not a Dvele representative or authorized warranty provider. We build and finish Dvele homes and handle site work, repairs, and remodels, but any factory warranty claims go through Dvele directly. We’ll help you document issues and coordinate with the manufacturer, but we won’t pretend to represent them.
Service Areas Near Rialto
We also run Dvele construction and service crews into Rialto service area neighbors, including Dvele service in Fontana to the west and Dvele service in Colton just south. We cover Hesperia, Victorville, Apple Valley, Oak Hills, and Spring Valley Lake for Dvele projects that span the pass.
Book Your Dvele Service in Rialto Today
If your Dvele home is showing wind damage, water at the base, or finish movement after a Rialto summer, call (833) 467-4075 — we also handle Dvele service in Bloomington if you’re just outside our core area. Brent will get you on the schedule and give you a straight answer. Good work doesn’t need a disclaimer.
Written by Brent Calloway, Owner at Hampton Contractors, serving Rialto since he first started running crews through the Cajon Pass corridor.